Tuerke is compact model ETHERNET/RFID interface

  • Time:
  • Click:206
  • source:AMANCIO CNC Machining
Equipment of two kinds of this many agreements can pass TBEN-L-RFID of graph Er gram and TBEN-S-RFID Ethernet/RFID Profinet, Ethernet/IP or Modbus TCP mix data from HF the RFID of UHF frequency band is read / in writing a head to transmit controller. Because defend order and degree is high, and but will carry out at the same time implement read to RFID with sensor join keep a head, these Block module become RFID to transform good choice of application. Need not switch ark, can utmost reduces wiring job. TBEN-S it is to exceed compact RFID module, can pass traditional and groovy I/O to transmit map RFID data controller, simplified thereby PLC is compositive, discharge functional module write need. Besides 2 RFID port, TBEN-S early childhood to be used at sensor to perhaps be carried out for 4 implement general DXP I/O. Although use width only of 32 Mm exceed compact design, TBEN-S-RFID still provided enough performance. As 8KB HF label read like take and be being written, of label of more than 100 UHF detect also can undertake conveniently quickly. Power source and network join come true through M8 connector. The TBEN-L that can pass Codesys process designing it is a few more largish model, but also provided controller function, can filter accordingly and pretreatment RFID data, operate the control of its and place join peripheral equipment direct correlation even. The user is OK in TBEN-Lx-4RFID-8DXP-CDS of Codesys environment lieutenant general easily setting is one of agreements of following aether net: Profinet, EtherNet/IP or Modbus TCP. TBEN-L use 800 MHz CPU, deploy 128 MB DDR3-RAM. Of module shine put for 256 MB. L module passes M12 connector and aether net join, pass 7/8 " connector join power source. CNC Milling CNC Machining