How to teach you to be taken out already the sodden bearing of be tired out?

  • Time:
  • Click:123
  • source:AMANCIO CNC Machining
For example, in next bearing of car direction machine, it is " blind lane " . Maintain when bearing implement when be tired out, ball assemble to a side. Ravelling when changing, the liner of bearing and coat are not an organic whole any more. At this moment, stay in " blind lane " medium, remained the coat of bearing only. Can want to take it, more difficult, the reason is the helper that do not have a law! Here, I tell you a hang: The first pace, measure bearing coat with vernier calipers inside aperture diameter, for instance, it is 55MM.

The 2nd pace, curium together wide make an appointment with 20MM, thick make an appointment with 5MM, grow the iron plate that makes an appointment with 60MM. The 3rd pace, it is in the center of iron plate, develop " central hole " . The 4th pace, with " central hole " for the centre of a circle, plan with the circle the former arc of 58MM of a diameter. The 5th pace, on grinder, drop the spare part beyond former arc according to former arc nap. The 6th pace, use hammer to bend iron plate hammer, (notice degree of curvature wants even) the iron plate length after measuring hammer to bend with vernier calipers, make this dimension is 55.

5MM. The 7th pace, be in " central hole " on, get into aperture with 5 millimeter broach. Cover with M6 tap buckle. The 8th pace, look for to connect the M6 that buckle to grow bolt to be twisted outwards from the concave side of bar go in (firm appear can) the 9th pace, its protruding look out " blind lane " direction presses bearing outer lane forcibly " ball chamfer " inside. The 10th pace, long bolt to " close solid " direction rotates, right now, " blind lane " medium bearing coat is met darling oneself go! The principle that uses this method is, when choosing bar, should inspect bearing outer lane inside aperture diameter is agile flexible. When bearing outer lane inside when aperture diameter is bigger, of course bar is wider thicker. (attention, screw bolt also is adjusted subsequently) still need to adjust at the same time, be according to bearing outer lane inside aperture diameter is agile the iron plate length of flexible. This " small unit " after be being used, do not desertion, can use for a long time. CNC Milling CNC Machining